BestGrout CE675M

Non-shrink Grout, Modified Polymer-Cement based.

Ưu điểm:

Very high and consistent mechanical properties.
Excellent workability, and flow ability.
Good self-leveling, and compacting characteristics.
Non-shrinking, expanding mortar.
Very easy application.
Non-toxic. Chloride-free, non-corrosion to reinforced steel bars.

BestGrout CE675M

Tổng quan kỹ thuật

Danh mục

Vữa

Non-shrink Grout, Modified Polymer-Cement based.

BestGrout CE475M is a high compressive strength, non-shrinkage, flowable, cement-based compound, supplied in premixed powder, ready to use. It consists special Portland cement, selected quartz sand and special chemicals.

Tài liệu kỹ thuật

bestgrout-ce675m-1-en.pdf

Thông số sản phẩm

Appearance/Color	Cement grey color/Dry powder
Bulk density	1.6 kg/liter
Specific density	Dry powder: 2.85 kg/liter Wet Grout: 2.20 kg/liter
Consumption	1.9 kg/liter. Need 76 bags for 1m3 mortar.
Application temperature	Minimum ambient temperature to apply: 15oC
Waterproof resistance	Reinforce the waterproof resistance for structures.
Mechanical strength	Increase the mechanical impact resistance.
Application time	Within 15 minutes after mixing.
Package	25kg/bag
Preserve	Unopened bag and in dry and cool places.
Shelf life	12 months from the produced date
Properties	Value
Water content (%)	13 ± 1
Flowing (mm)	230 ÷ 320
Expansion at 1;3;14;28 days (%)	0 ÷ 0.3
Compressive strength (MPa) 1 day() 3 days() 7 days() 28 days(*)	≥ 22 ≥ 40 ≥ 55 ≥ 65

Ứng dụng

Surface preparation:

The surface must be clean, solid, and free from grease or impurities.
Treat all the surface leaking (if any).
The water absorption surface must be saturated to avoid water loss locally and reduce the flow of materials in the application process.

Mixing:

Add BestGrout CE675M powder slowly into the mixing water to achieve the flexibility (viscosity) required for the application. However, typically, the optimum mixing water is 13% compared to the weight of powder (3.25 liters of water per 25 kg bag of BestGrout CE675M). Use a paddle mixer with the speed of 500-600 revolutions/minute to mix the compound until achieving the homogeneous as required (about 3 minutes).

Applying:

After mixing, use an iron trowel to stir lightly for a few seconds to release air bubbles. Start to pour the compound immediately into the prepared formwork continuously to maintain the necessary pressure for filling the material layer and to avoid air entrapment in the structure.
Notes: Framework must be checked and guaranteed not to leak water during application and before the compound gets cured. Do not use the material which is out of application time.

Important notes:

The product is applied to the minimum clearance of structure is 8 mm Curing procedures should be ensured strictly as products originating from other cement.
When applying to large structures with a thickness greater than 60 mm, to save the materials and reduce the heat of hydrolysis, and hydration, it is better to add large aggregates which are carefully selected as gravel, small stones 1x1, etc. The quantity of large aggregate is added from 50÷100% and the mixing water is not over 14% compared to the initial weight of BestGrout CE675M. The material should be tested before the application.

Cleaning:

Clean tools and equipment with water before the mixed grout hardens.

Safety:

BestGrout CE675M is alkaline like normal cement and can cause skin irritations to persons with sensitive skin. Wear gloves and masks while handling the product. In case of accidental eye contact, wash with fresh water and seek medical advice immediately.

Ưu điểm

Very high and consistent mechanical properties.
Excellent workability, and flow ability.
Good self-leveling, and compacting characteristics.
Non-shrinking, expanding mortar.
Very easy application.
Non-toxic. Chloride-free, non-corrosion to reinforced steel bars.