BestSeal PS010

BestSeal PS010 is used for waterproofing all common construction materials such as:

• Low-fired clay products such as: roofing tiles, decorative bricks, floor tiles (terracotta tiles), flower pots...

• Antique-style decorative products made from cement mortar, lightweight concrete, terrazzo stone, granite cladding...

• Cement plaster mortar, painted walls, brick walls…

• Gypsum ceilings and gypsum-based products.

• Mineral-based thermal insulation materials...

• High waterproofing performance with long service life.

• Transparent, colorless, and non-film-forming.

• Does not alter the color, surface condition, or aesthetic appearance of the substrate.

• Widely applicable to many different materials.

• Simple and easy to use.

• Stable quality with high economic efficiency.

SURFACE PREPARATION:

• The surface to be waterproofed must be dry, clean, and free from dust, grease, or old waterproofing layers.

• Loose particles or poorly adhered layers must be removed completely.

APPLICATION PROCEDURE:

Application:

• Use a brush, roller, low-pressure spray equipment, or directly immerse the material to be waterproofed into the BestSeal PS010 solution.

• Depending on the substrate structure, site conditions, and available equipment, select the most suitable application method.

• Depending on the water absorption rate (or porosity) of the substrate, the immersion time or number of spray/brush applications may vary to achieve the desired penetration depth of BestSeal PS010. Preliminary testing should be conducted for each type of substrate.

• The application area of BestSeal PS010 must be well ventilated so that BestSeal PS010 can adequately react with CO₂ in the air to achieve optimal waterproofing performance. Higher ambient temperatures help enhance the effectiveness of BestSeal PS010.

• BestSeal PS010 achieves optimal waterproofing performance after drying for at least 24 hours from the time of application.

• BestSeal PS010 must not be applied during rain unless adequate shelter is provided.

Notes:

• Use BestSeal PS010 only on final finished surfaces.

• Do not use BestSeal PS010 on surfaces that will later require additional finishing materials, as BestSeal PS010 prevents bonding between layers.

CLEANING:

• Clean tools and equipment immediately after completion using clean water and soap.

SAFETY INSTRUCTIONS:

• BestSeal PS010 is an alkaline solution and may severely irritate skin (even when diluted). Gloves, masks, and safety goggles must be worn during use.

• In case of contact with skin, eyes, nose, or mouth, rinse immediately several times with clean water and seek medical attention at the nearest healthcare facility for timely and proper treatment.