BestSeal BP411 Bitac

• Floors.

• Basements.

• Simple application.

• No primer required; can be applied on dry or damp surfaces.

• Fast drying.

• High adhesion strength, good elongation, seals fine cracks.

• Friendly to human health and the environment.

SURFACE PREPARATION

• The surface to be waterproofed must be clean, sound, and free from oil, grease, dirt, moss, cement laitance, and other contaminants.

• Surface defects (cracks, voids, etc.) must be repaired and patched using suitable specialized BestRepair products from Bestmix (consult the technical department).

• The substrate may be dry or damp, but no standing water should be allowed on the surface.

APPLICATION PROCEDURE

Mixing:

- The product is pre-mixed; simply stir thoroughly before use.

Application:

- BestSeal BP411 Bitac can be applied with a brush, short-nap roller, or a suitable spraying machine at a consumption rate of 0.5-0.6 kg/m² per coat.

- To ensure waterproofing performance, BestSeal BP411 Bitac must be applied in at least 2 coats perpendicular to each other so that the material fully covers the surface to be waterproofed. Each subsequent coat is applied after the previous one has dried.

Note:

- Do not apply in rainy conditions. If it rains during application, stop work immediately and promptly cover the freshly applied area to protect it from direct contact with rainwater.

- For surface areas regularly subjected to mechanical impact or UV radiation during use, a layer of cement-sand mortar mixed with BestLatex R114 Eco or BestLatex R126 Saving must be applied (72 hours after the final coat) to protect the material surface.

- Do not dilute the product with water or any other component.

- Close the container tightly after use.