BestRepair CE650
One-component, fast-setting, modified cement-polymer-based spray repair mortar
Advantages:
One-component, precisely batched and homogenized at the factory, easy to use, and reduces risks during application.
High plasticity, easy to adjust, easy to apply, saving labor and materials.
Non-shrink, limiting surface cracking during the curing process.
Fast and high strength development, allowing the structure to be put into service sooner.
Improves abrasion resistance, oil resistance, chemical corrosion resistance, moisture resistance, and waterproofing of the repaired surface.
Enhances the aesthetic value of the structure.
Easy to cure with no additional curing costs.
Non-toxic and can be used for potable water tanks.
Chloride-free, preventing corrosion of reinforcing steel.
Suitable for the climatic conditions of Vietnam.
BestRepair CE650
Technical summary
Category
Materials For Other Industries
One-component, fast-setting, modified cement-polymer-based spray repair mortar
BestRepair CE600 is a one-component, cement-polymer-based surface repair mortar.
BestRepair CE600 is a combination of: special cement, selected silicate minerals and mineral fibers, polymer, and specialized additives to provide the physical and chemical properties required for the product.
Technical documents
Product data
| Composition: | Cement, selected mineral aggregates, additives. |
|---|---|
| Appearance: | Dry powder, cement-gray color. |
| Density: |
|
| Consumption: | Approximately 79-80 bags per 1 m³ of applied mortar. |
| Packaging: | 25 kg/bag. |
| Storage: | Store in a cool, dry place at ambient temperatures of 5°C-35°C. |
| Shelf life: | 06 months from the date of manufacture. |
Applications
Used for patching, repairing, and reprofiling to restore floor, slab, wall, ceiling, and partition surfaces, etc. that are honeycombed or damaged by erosion, impact, or mechanical abrasion during service.
Restores the flatness of new surfaces that have not achieved the required smoothness during construction.
Used for all types of surfaces in areas with light to medium loads such as: factory floors, parking lots, swimming pool floors, water tanks, precast elements, etc.
Advantages
One-component, precisely batched and homogenized at the factory, easy to use, and reduces risks during application.
High plasticity, easy to adjust, easy to apply, saving labor and materials.
Non-shrink, limiting surface cracking during the curing process.
Fast and high strength development, allowing the structure to be put into service sooner.
Improves abrasion resistance, oil resistance, chemical corrosion resistance, moisture resistance, and waterproofing of the repaired surface.
Enhances the aesthetic value of the structure.
Easy to cure with no additional curing costs.
Non-toxic and can be used for potable water tanks.
Chloride-free, preventing corrosion of reinforcing steel.
Suitable for the climatic conditions of Vietnam.
Application instruction
Surface preparation
The surface to be repaired must be properly prepared.
Loosely adhered patches or weak concrete must be completely removed using suitable mechanical methods.
Ensure the surface is free from oil, grease, or similar contaminants.
Use a high-pressure water jet to wash away impurities and dust before application.
If the surface is dry, dampen it with clean water.
Application procedure
Dry spraying: Use a specialized spraying machine that mixes the powder with the appropriate amount of water at the spray nozzle.
Wet spraying: Slowly add BestRepair CE650 powder into a pre-measured amount of clean water. The mixing water ratio is 12-14% of the powder weight, equivalent to approximately 3.0-3.5 litres of clean water per 25 kg bag.
Mix using a suitable forced-action mixer at a speed of 300-400 rpm for about 3 minutes until the mixture is homogeneous.
Then feed the mixture into the hopper of the specialized spraying machine.
BestRepair CE600 is a one-component, cement-polymer-based surface repair mortar.
BestRepair CE600 is a combination of: special cement, selected silicate minerals and mineral fibers, polymer, and specialized additives to provide the physical and chemical properties required for the product.