BestGrout E60
Non-shrink, high-strength, solvent-free epoxy-based, three-component pourable grout
Advantages:
High strength with fast development.
Non-shrink, crack-free.
Easily fills nooks, crannies, and narrow gaps.
Bonds well to all cleaned surfaces.
Chemical resistant, abrasion resistant, impact resistant, and withstands high dynamic loads.
Non-toxic and environmentally friendly.
BestGrout E60
Technical summary
Category
Materials For Other Industries
Non-shrink, high-strength, solvent-free epoxy-based, three-component pourable grout
BestGrout E60 is a non-shrink, high-strength, low-viscosity, three-component, solvent-free epoxy-based pourable grout.
BestGrout E60 is a combination of pure epoxy resin, specialized additives, and specially selected silicate minerals. In use, simply mix the components thoroughly at the predefined ratio; no further preparation is required.
Technical documents
Product data
| Appearance: |
|
|---|---|
| Density: | 2.10 ± 0.02 kg/litre (25°C). |
| Mixing ratio: | A/B/C = 2.5/1.0/17.5 (by weight). |
| Consumption: | 2.1 kg per 1 litre of grout. |
| Packaging: | 32.5 kg/set (# 15.50 litre/set). |
| Storage: | Cool, dry place, ambient temperature 5°C - 35°C. |
| Shelf life: | 12 months from the date of manufacture. |
Applications
Used in heavy-load applications such as:
Repairing concrete surfaces and filling voids.
Filling joints and bearings in precast and prefabricated components, etc.
Anchoring machine foundation bolts, rail bases, filling under column base plates, etc.
When pigmented, BestGrout E60 is used as a finishing coat for floor surfaces for load-bearing, chemical-resistant, abrasion-resistant, and mechanical impact-resistant purposes, etc.
Advantages
High strength with fast development.
Non-shrink, crack-free.
Easily fills nooks, crannies, and narrow gaps.
Bonds well to all cleaned surfaces.
Chemical resistant, abrasion resistant, impact resistant, and withstands high dynamic loads.
Non-toxic and environmentally friendly.
Application instruction
SURFACE PREPARATION
The substrate must be sound, dry, with moisture content not exceeding 4%. Oil, grease, dust, dirt, rust, burrs, and spilled cement mortar must be completely removed.
APPLICATION PROCEDURE
Preparation for application
Gaps or holes with potential for leakage must be sealed tightly with suitable materials.
Where formwork or shuttering must be used, the surfaces in direct contact with the material must be isolated with a PE plastic layer or a suitable release agent to facilitate later removal of the formwork.
Mixing
Before application, Components A and B must be thoroughly mixed, then Component C is added at the correct ratio using a mixer at 300-400 rpm. The mixing time is about 3 minutes or longer until homogeneous.
Application
After thorough mixing, use a steel trowel to stir gently for a few seconds to release air bubbles. Then, the mixture is poured immediately and continuously into the prepared location to maintain the necessary pressure and avoid air entrapment in the mixture.
Note
Do not use material that has exceeded the allowable working time.
BestGrout E60 is a non-shrink, high-strength, low-viscosity, three-component, solvent-free epoxy-based pourable grout.
BestGrout E60 is a combination of pure epoxy resin, specialized additives, and specially selected silicate minerals. In use, simply mix the components thoroughly at the predefined ratio; no further preparation is required.