BestCoat EP708M

Self-leveling epoxy, elastic, two components

Advantages:

Good elasticity, suitable for cold rooms.
The ability to self-level and achieve high gloss.
Excellent chemical and mechanical resistance.
Meet microbiological, food and pharmaceutical safety standards.
Increase the aesthetic level of the building.
Easy to clean, clean, resistant to microorganisms, mold..., easy to maintain, repair, patch...
Non-toxic, environmentally friendly

Download technical documents

BestCoat EP708M

Appearance/Color	Yellow, Green, Blue, Red brown, Grey, (optional on requested)
Solid content	100 %
Density (25oC)	Part A: 1.62 ± 0.05 kg/LPart B: 0.96 ± 0.05 kg/LA+B mixed: 1.5 ± 0.05 kg/L @ 25oC (Depending on colored).
Consumption	1.50 kg/m2 /mm thickness.
Working condition	10oC (above dew point temperature of 5oC) ≤T ≤40oC. RH ≤ 80%
Mixing ratio	See on the label.
Aggregate size	Dmax :125 µm.
Flowability	d ≥ 200 mm
Storage condition	In cool, dry place (5oC ÷ 35 oC)
Shelf - life	12 months from the date of manufacturing.
Packaging	10 kg/set; 20kg/set; 40 kg/set. Or as requested.
Ambient temperature	+20oC
Pot-life (Minute)	50
Ambient temperature	+20oC
Walkable (Hr)	48
Full cure (Day)	10
Compressive strength (MPa) (min)	25
Bonding strength (MPa)	≥ 1.5
Shore hardness D (min)	60
Time	H2O
01 day	0.02
04 day	0.06
7 days	0.08
Temperature	Time
+ 50oC	Long - life

Coating flooring system:

01 primer layer of BestPrimer EP701, BestPrimer EP702 or BestPrimer EP703.
01 self-levelling layer of BestCoat EP708M with the thickness as design required.

Substrate requirement:

Required concrete surface: Compressive strength: ≥ 20 MPa, tensile strength: ≥ 1.5 MPa. The substrate surface must be flat, solid and dry. Cracks, defective positions must be treated, repaired, patched according to the correct procedure. Impurities, debris, dirt, grease must be completely removed. For metal, wood: Clean grease, rust, clean with BestThinner SC01.

Mixing:

Use an electric mixer or special blender at low speed (300÷400 rpm) to mix material about 5 minutes or longer until material is homogeneous. If need to split quantity of material, should stir part A before weight.

Application:

Pour the mixed mixture onto the corresponding surface area to each parallel rows with width 200 ÷ 300 mm, using a jagged scraper to spread out materials according to the thicknes required. Using a notched roller to support the leveling and get rid of air bubbles.
Note: While the mixture is not hardening, the application space should be no dust, avoid insects

Cleaning:

Health and Safety:

Product is non toxic, non flammable. Can be allergic to skin. It is advised to wear comforter, gloves, protective glasses. In case of accidental eye contact, wash with fresh water and seek medical advice immediately.

Good elasticity, suitable for cold rooms.
The ability to self-level and achieve high gloss.
Excellent chemical and mechanical resistance.
Meet microbiological, food and pharmaceutical safety standards.
Increase the aesthetic level of the building.
Easy to clean, clean, resistant to microorganisms, mold..., easy to maintain, repair, patch...
Non-toxic, environmentally friendly