BestCoat EP708
Self-leveling epoxy, high strength, two components
Advantages:
Low viscosity, excellent self-leveling properties, and outstanding gloss.
Allows thin-layer application down to 1.0 mm.
Meets microbiological, food safety, pharmaceutical, GMP, and HACCP standards.
Resistant to chemicals, impact, mechanical abrasion, and heavy loads.
Easy to clean, wash, maintain, and repair during service life.
Environmentally friendly.
BestCoat EP708
Technical summary
Category
Floorings
Self-leveling epoxy, high strength, two components
Technical documents
Product data
| Appearance/Color | Yellow, green, blue, reddish brown, grey, (optional on requested) |
|---|---|
| Solid content | ~ 100% |
| Density | 1.90 ± 0.05 kg/litre @ 25°C |
| Consumption | 1.90 kg/m²/mm thickness. |
| Mixing ratio | A: B = 12:1 (by weight) |
| Storage condition | In cool, dry place (5°C ÷ 35°C) |
| Shelf life | 12 months from manufacturing date (in sealed package and stored in cool and dry place) |
| Packaging | 10 kg/set; 40 kg/set. |
Applications
Sterile rooms, hospital operating rooms, laboratories...
Pharmaceutical and veterinary processing plants, biological product factories...
Food, seafood, and agricultural processing plants, textile factories...
Electronic component, optical, and precision equipment assembly factories...
Chemical and disinfectant plants...
Canteens, daycare centers...
Advantages
Low viscosity, excellent self-leveling properties, and outstanding gloss.
Allows thin-layer application down to 1.0 mm.
Meets microbiological, food safety, pharmaceutical, GMP, and HACCP standards.
Resistant to chemicals, impact, mechanical abrasion, and heavy loads.
Easy to clean, wash, maintain, and repair during service life.
Environmentally friendly.
Application instruction
SURFACE PREPARATION:
For concrete substrates, the minimum compressive strength must be ≥ 20 MPa and tensile strength ≥ 1.5 MPa. The substrate must be level, sound, and dry (maximum moisture content 4%).
Cracks and defective areas must be repaired in accordance with proper procedures. All contaminants, debris, dust, oil, grease, etc. must be completely removed.
APPLICATION PROCEDURE:
Coating system:
01 primer layer of BestPrimer EP701, BestPrimer EP702 or BestPrimer EP703.
01 self-leveling coating of BestCoat EP708 at the thickness specified in the design.
Mixing:
Add component B into component A according to the specified ratio. Use an electric mixer or suitable mixing equipment (300–400 rpm) to mix for approximately 3 minutes or longer until a homogeneous mixture is achieved.
Note: When dividing into smaller batches, stir component A thoroughly before weighing.
Application:
Pour the mixed mixture onto the corresponding surface area to each parallel rows with width 200 ÷ 300 mm, using a jagged scraper to spread out materials according to the thicknes required. Using a notched roller to support the leveling and get rid of air bubbles
Note: The application area must remain dust-free and protected from insects until the material has fully cured.
CLEANING:
Clean tools, equipments with dry cloth and BestThinner SC01.
SAFETY INSTRUCTIONS:
BestCoat EP708 may cause irritation to sensitive skin upon prolonged contact. Wear protective gloves, masks, and safety goggles during application.
In case of contact with eyes, nose, mouth, etc., rinse immediately with plenty of clean water and seek medical attention at the nearest healthcare facility.
Avoid contact of the product with food and household utensils. Keep out of reach of children.
Dispose of excess material in accordance with local regulations.