BestCoat EP707
Self-leveling epoxy, high strength, two components
Advantages:
Low viscosity, excellent self-leveling properties, and outstanding gloss.
Allows thin-layer application down to 1.0 mm.
Meets microbiological, food safety, pharmaceutical, GMP, and HACCP standards.
Resistant to chemicals, impact, mechanical abrasion, and heavy loads.
Easy to clean, wash, maintain, and repair during service life.
Environmentally friendly.
BestCoat EP707
Technical summary
Category
Floorings
Self-leveling epoxy, high strength, two components
BestCoat EP707 is a two-component, solvent-free, self-leveling epoxy coating formulated from 100% pure epoxy resin, selected fine silicate mineral fillers for hardness reinforcement, and specialized additives.
Technical documents
Product data
| Color | Yellow, blue, green, reddish brown, gray. Custom colors are available upon request subject to minimum order quantity. |
|---|---|
| Density | 1.60 ± 0.05kg/liter at 25°C (depending on colors) |
| Solid content | ~ 100% |
| Consumption | 1.60 kg/m²/mm thickness. |
| Mixing ratio | A : B = 7:1 (by weight) |
| Storage | In cool, dry place (5°C ÷ 35°C) |
| Shelf life | 12 months from the date of manufacture (in sealed package and stored in cool and dry place) |
| Packaging | 18; 36 kg/set. |
Applications
BestCoat EP707 is used as a surface coating for concrete or metal floors requiring premium performance, such as:
Sterile rooms, hospital operating rooms, laboratories ...
Pharmaceutical and veterinary processing plants ...
Food, seafood, and agricultural processing plants ...
Electronic component, optical, and precision equipment assembly factories ...
Chemical and disinfectant plants ...
Canteens, daycare centers ...
Advantages
Low viscosity, excellent self-leveling properties, and outstanding gloss.
Allows thin-layer application down to 1.0 mm.
Meets microbiological, food safety, pharmaceutical, GMP, and HACCP standards.
Resistant to chemicals, impact, mechanical abrasion, and heavy loads.
Easy to clean, wash, maintain, and repair during service life.
Environmentally friendly.
Application instruction
SURFACE PREPARATION:
For concrete substrates, the minimum compressive strength must be ≥ 20 MPa and tensile strength ≥ 1.5 MPa. The substrate must be level, sound, and dry (maximum moisture content 4%).
Cracks and defective areas must be repaired in accordance with proper procedures. All contaminants, debris, dust, oil, grease, etc. must be completely removed.
APPLICATION PROCEDURE:
Coating system:
One coat of BestPrimer EP701, BestPrimer EP702 or BestPrimer EP703, depending on substrate moisture condition.
One self-leveling coat of BestCoat EP707 at the thickness specified in the design.
Mixing:
Add component B into component A according to the specified ratio. Use an electric mixer or suitable mixing equipment (300–400 rpm) to mix for approximately 3 minutes or longer until a homogeneous mixture is achieved.
Note: When dividing into smaller batches, stir component A thoroughly before weighing.
Application:
Pour the mixed material onto the corresponding floor area in parallel strips with a width of 200–300 mm, then use a suitable notched rake to spread the material evenly to the required thickness.
Use a specialized spike roller to assist self-leveling and eliminate all entrapped air bubbles.
Note: The application area must remain dust-free and protected from insects until the material has fully cured.
CLEANING:
Clean tools before curing using a dry cloth and BestThinner SC01.
SAFETY INSTRUCTIONS
BestCoat EP707 may cause irritation to sensitive skin upon prolonged contact. Wear protective gloves, masks, and safety goggles during application.
In case of contact with eyes, nose, mouth, etc., rinse immediately with plenty of clean water and seek medical attention at the nearest healthcare facility.
Avoid contact of the product with food and household utensils. Keep out of reach of children.
Dispose of excess material in accordance with local regulations.
BestCoat EP707 is a two-component, solvent-free, self-leveling epoxy coating formulated from 100% pure epoxy resin, selected fine silicate mineral fillers for hardness reinforcement, and specialized additives.