BestBond EP754

• Used as a primer coat or mixed with aggregates (fiber or granular form) to create a high-strength, multi-purpose bonding mortar with chemical resistance and abrasion resistance for repairing, patching, or leveling concrete surfaces,...

• BestBond EP754 can be applied to concrete floors, concrete slabs, bridge piers, bridge decks, cement plaster layers, fiber cement boards, epoxy mortar in factories, warehouses, parking garages…

• Its high penetration ability enables deep bonding into the substrate.
  Excellent adhesion to all material surfaces, including metal surfaces.
  High alkali resistance and excellent resistance to corrosion and chemical attack.
  Easy to apply with common tools such as brushes, rollers,...
  Low material consumption makes it highly economical and efficient.

SURFACE PREPARATION:

• The surface to be repaired must be sound and dry (maximum surface moisture content 4%); laitance, loose particles, and excess cement mortar must be chipped off. Grease, moss, mold, mud, dirt... must be properly cleaned to ensure complete removal.

APPLICATION PROCEDURE:

Mixing:

• Before application, Components A and B must be thoroughly mixed in the correct ratio using an electric mixer or pneumatic mixing paddle operating at 300 ÷ 400 rpm.
  Minimum mixing time is 03 minutes, but mixing may continue longer until the required uniform consistency is achieved.

Application:

• Use a brush to apply an even coat of BestBond EP754 onto the surface as a primer layer, and immediately apply the BestBase EP700 epoxy mortar while BestBond EP754 is still wet.

Note: Do not use mixed material that has exceeded its allowable working time.

CLEANING:

• Use BestThinner SC-01 or a suitable solvent to clean tools immediately after use and before the mixture begins to cure. Then wash again with clean water and soap.

SAFETY INSTRUCTIONS:

• Both components are non-hazardous and non-flammable. However, they may cause allergic reactions on sensitive skin.

• Gloves, masks, and safety goggles must be worn during application.

• In case of contact with eyes, nose, or mouth, rinse immediately several times with clean water before going to the nearest medical facility for timely and proper treatment.