BestBond EP752

• Permanent connection for mortar or new concrete mixed with: cured concrete, brick, stone, steel, or other building materials.

• This product is also used to seal crow's feet cracks, and as a protective layer for structural steel parts... 

• Ease of construction

• Solvent-free, unaffected by moisture

• Apply at a low temperature

• High tensile strength

Surface condition:​

• The cracked surface must be clean, dry, not bonding impurities easy blister, remove all dust by proper mechanical methods.

Surface preparation:

• The cracks must be cut or sawed out to a minimum width of 5mm, a depth ​greater than or equal to 1.5 times the width. The crack bottom has U-shaped. Using a compressor air to clean the cracked surface.

Mixing:

• Two components A and B should be carefully mixed under the right ratio by slowly stirring (at speed of 300  ÷ 400 rpm).

• The minimum mixing duration should not be less than 03 minutes and can be longer until reaching the required homogeneity.

Cleaning:

•  Use BestThinner SC-01 to clean instruments as soon as after the execution and before the mixture’s hardening.

Safety:

• Both components are non-toxic and non-flammable. This product can be allergic to the skin, therefore should be prevented from direct contact with the skin. It is advised to wear PPEs while handling the product. In case of accidental eye contact, wash with fresh water and seek medical advice immediately.