BestBond EP751 Fastfix
Multi-purpose adhesive-based epoxy, high-strength, two components.
Advantages:
Easy and simple to apply, high efficiency.
Excellent adhesion with various materials.
Excellent chemical and abrasion resistance.
Fast strength development, no shrinkage when curing.
Easy to identify when the allowed construction time has ended.
BestBond EP751 Fastfix
Technical summary
Category
Retail
Multi-purpose adhesive-based epoxy, high-strength, two components.
BestBond EP751 is a versatile, high-strength, fast-curing, two-component epoxy mortar, combining pure epoxy resin with specially selected silicate minerals to create superior physico-chemical properties.
With suitable mechanical properties, BestBond EP751 allows for easy and quick application to pitted, cracked, and long-eroded surfaces, significantly saving construction time.
Technical documents
Product data
| Composition |
|
|---|---|
| Appearance |
|
| Mixing ratio | A:B = 2:1 (by weight) |
| Mixed density | 1.74 ± 0.05 kg/litre (@ 25°C) |
| Packaging |
|
| Storage | Stored in a cool, dry place, temperature from 5°C - 35°C. |
| Shelf life | 12 months from the date of manufacture |
Applications
Suitable for materials such as: concrete, natural stone, artificial stone, mortar, silicate bricks, steel, etc., for the following purposes:
Repairing and patching cracks, honeycomb voids, and salt corrosion...
Bonding materials together such as: assembling concrete, natural stone, artificial stone, embedding bolts and steel into concrete, stone, and other high-strength materials.
Advantages
Easy and simple to apply, high efficiency.
Excellent adhesion with various materials.
Excellent chemical and abrasion resistance.
Fast strength development, no shrinkage when curing.
Easy to identify when the allowed construction time has ended.
Application instruction
SURFACE PREPARATION:
The cracked surface must be clean, dry, not bonding impurities easy blister, remove all dust by proper mechanical methods.
The cracks must be cut or sawed out to a minimum width of 5mm, a depth greater than or equal to 1.5 times the width. The crack bottom has U-shaped. Using a compressor air to clean the cracked surface.
APPLICATION PROCEDURE:
Mixing:
Two components A and B should be carefully mixed under the right ratio by slowly stirring (at speed of 300 ÷ 400 rpm).
The minimum mixing duration should not be less than 03 minutes and can be longer until reaching the required homogeneity.
Application:
Use a steel trowel or suitable tools to fill holes on the surface. For vertical surface or the underside of the ceiling should apply with a thickness of each layer not over 5mm to avoid sagging of material.
Note: Do not use a material that has rime application over.
CLEANING:
Use BestThinner SC-01 to clean instruments as soon as after the execution and before the mixture’s hardening
SAFETY INSTRUCTIONS:
Both components are non-toxic and non-flammable.
This product can be allergic to the skin, therefore should be prevented from direct contact with the skin. It is advised to wear PPEs while handling the product.In case of accidental eye contact, wash with fresh water and seek medical advice immediately.
BestBond EP751 is a versatile, high-strength, fast-curing, two-component epoxy mortar, combining pure epoxy resin with specially selected silicate minerals to create superior physico-chemical properties.
With suitable mechanical properties, BestBond EP751 allows for easy and quick application to pitted, cracked, and long-eroded surfaces, significantly saving construction time.